Chèvre

https://fromaggio.com/products/calcium-chloride||https://fromaggio.com/products/chevre-culture||https://fromaggio.com/products/rennet||https://fromaggio.com/products/fromaggio-salt-for-cheesemakingChèvre is a fresh and easy goat milk cheese that can can accompany salads and fresh dishes.1. Instructions
Please ensure that all parts are cleaned and sanitized. Then insert the plastic drainer into the heating pot. Add the Soft cutter/mixer on the shaft by pushing it down as far as possible.
2. +Milk
Please add: 3 liter of pasteurized goat milk.
3. Heat
Time: 01:30:00
Temperature: 35 °C
Speed: 30 RPM
4. +Ingredients
Please add:
6 drop(s) of Fromaggio Calcium Chloride Boost
5. Mix
Time: 00:01:00
Temperature: 30 °C
Speed: 30 RPM
6. +Ingredients
Please add:
2 g of Fromaggio Chèvre-Goat Starter Culture
7. Mix
Time: 00:01:00
Temperature: 33 °C
Speed: 30 RPM
8. Heat
Time: 01:00:00
Temperature: 33 °C
Speed: OFF
9. +Ingredients
Please add:
2 g of Fromaggio Microbial Rennet for Soft Cheese
Tip: Mix rennet in 1/8 cup (30 ml) of room-temperature bottled or filtered water.
10. Mix
Time: 00:00:30
Temperature: 31 °C
Speed: 50 RPM
11. Heat
Time: 04:00:00
Temperature: OFF
Speed: OFF
12. Cut
Temperature: OFF
Cut Size: Soft
13. Heat
Time: 06:00:00
Temperature: OFF
Speed: OFF
14. Drain
To drain, lift up the drainer by the handle. Put the mesh strainer on top of the heating pot, and the drainer inside of the mesh strainer
Time: 04:00:00
15. Drain
To drain, lift up the drainer by the handle. Put the mesh strainer on top of the heating pot, and the drainer inside of the mesh strainer
Time: 10:00:00
Tip: Use a ladel to carefully scoop the curd into the mesh strainer, where the curd will drain for 10 hours. Drain at room temperature (68-77F or 20-25C).
16. Instructions
Transfer the cheese into a bowl and scrape the curd out of the mesh strainer to ensure the best yield.
17. +Ingredients
Please add:
12 g of Salt for Cheesemaking
Tip: 12 grams of salt is an estimate. Add 1-1.5% of the final cheese weight. Add herbs and spices at this stage (optional). Mix well with the spatula.
18. Instructions
Transfer the cheese into a container and refrigerate.
19. Instructions
Enjoy! ps. Why throw away all that wonderful whey? See our blog post on some amazing uses for whey, including making more cheese! https://fromaggio.com/blogs/cheese-blog/what-to-do-with-all-that-leftover-whey

ステップ

1. 取扱説明書 すべての部品を洗浄・消毒してください。その後、プラスチック製の水切りを加熱ポットに差し込みます。シャフトにソフトカッター/ミキサーをできるだけ奥まで押し込んで取り付けてください。 2. +ミルク 加えてください:3リットルの低温殺菌ヤギミルク。 3. 熱 時間: 00:45:00 温度: 31 °C 速度: 30 RPM 4. +成分 6滴を加えてください: フロマッジョ カルシウムクロライド ブースト 5. 混ぜる 時間: 00:01:00 温度: 30 °C 速度: 30 RPM 6. +成分 以下を追加してください: 2 g の フロマージュ シェーブル(ヤギ乳)スターターカルチャー 7. 熱 時間: 00:02:00 温度: 31 °C 速度: オフ 8. 混ぜる 時間: 00:01:00 温度: 31 °C 速度: 30 RPM 9. +成分 以下を追加してください: 2 g の フロマッジョ ソフトチーズ用微生物レンネット ヒント:レンネットは、室温のボトル入りまたはろ過水1/8カップ(30ml)に混ぜてください。 10. 混ぜる 時間: 00:00:30 温度: 31 °C 速度: 50 RPM 11. 取扱説明書 次の10時間のうち、4時間後にカッティング操作を行った後、カードが酸性化します。その後の排水作業については、この時間以降にのみ介入が求められます。 12. 熱 時間: 04:00:00 温度: オフ 速度: オフ 13. カット 温度:オフ カットサイズ:ソフト 14. 熱 時間: 06:00:00 温度: オフ 速度: オフ 15. 排水 排水するには、取っ手を持ってドレイナーを持ち上げます。メッシュストレーナーを加熱ポットの上に置き、その中にドレイナーを入れてください。 時間:02:00:00 16. 排水 水切りをするには、取っ手を持って水切り器を持ち上げます。メッシュストレーナーを加熱ポットの上に置き、その中に水切り器を入れます。 時間:10時間 ポイント:おたまを使って凝乳を丁寧にメッシュストレーナーにすくい入れます。凝乳はそこで10時間水切りします。室温(20〜25℃)で水切りしてください。 17. 取扱説明書 チーズをボウルに移し、メッシュストレーナーからカードをこそげ落として、最高の収量を確保してください。 18. +成分 12 g の チーズ作り用の塩 ヒント:塩12グラムは目安です。最終的なチーズの重量の1〜1.5%を加えてください。この段階でハーブやスパイスを加えることもできます(任意)。ヘラでよく混ぜ合わせてください。 19. 取扱説明書 チーズを容器に移し、冷蔵庫で保存してください。 20. 取扱説明書 お楽しみください!追伸:あの素晴らしいホエーを全部捨ててしまうのはもったいないですよね?ホエーの驚くべき活用法については、こちらのブログ記事をご覧ください。チーズ作りにも使えます! https://fromaggio.com/blogs/cheese-blog/what-to-do-with-all-that-leftover-whey

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)